{"id":3571,"date":"2026-10-23T12:21:47","date_gmt":"2026-10-23T04:21:47","guid":{"rendered":"http:\/\/www.neshananews.com\/blog\/?p=3571"},"modified":"2026-10-23T12:21:47","modified_gmt":"2026-10-23T04:21:47","slug":"how-to-make-resin-charms-with-glitter-powder-4f14-be90f2","status":"publish","type":"post","link":"http:\/\/www.neshananews.com\/blog\/2026\/10\/23\/how-to-make-resin-charms-with-glitter-powder-4f14-be90f2\/","title":{"rendered":"How to make Resin Charms with glitter powder?"},"content":{"rendered":"

If you\u2019re someone who\u2019s ever scrolled through Instagram or TikTok and seen those dreamy, glitter-filled resin charms that look like tiny pieces of stardust you can wear as jewelry, you\u2019ve probably wondered how they\u2019re made. As a resin charms supplier who\u2019s been crafting and distributing these little pieces of art for over seven years, I get asked this question at least once a day\u2014either from new makers just starting out, small boutique owners looking to add resin items to their inventory, or even customers who want to try making their own at home. Today, I\u2019m breaking down the process step by step, not just as a crafter who loves the work, but with the practical, science-backed knowledge I\u2019ve picked up from testing hundreds of batches to make sure every charm turns out bright, durable, and ready to sell (or gift). Resin Charms<\/a><\/p>\n

<\/p>\n

First, let\u2019s talk about the basics: why glitter works so well in resin charms, and why you need to choose the right kind. Resin is a two-part epoxy that cures to a hard, clear plastic, and when mixed with the right glitter, it turns a simple, plain charm into something that catches light from every angle. But not all glitter is created equal. I\u2019ve learned the hard way that cheap, craft-store glitter that\u2019s made with plastic particles can float unevenly in resin, or even leach into the resin over time, making your charms look dull after a few months. For consistent results, I always use fine-grade polyester glitter, and I pick it in specific cuts: ultra-fine for a subtle, shimmery glow, medium-cut for a bit more sparkle that stands out, and holographic glitter for that rainbow effect everyone loves. I also avoid chunky glitter for most small charms\u2014too big, and it can get stuck in the mold edges or weigh down the resin, leading to bubbles that are hard to fix.<\/p>\n

Next, gather your supplies, and let me be clear: skipping quality supplies will lead to bad charms, and as a supplier who\u2019s had customers send back batches made with cheap resin that never cured, I can tell you this is non-negotiable. You\u2019ll need a high-quality two-part epoxy resin (I prefer a 1:1 ratio for charms\u2014it\u2019s easy to measure, cures to a hard finish, and doesn\u2019t yellow over time, which is a common issue with cheaper resins), mixing cups and stir sticks (disposable plastic ones work great\u2014just make sure they\u2019re not contaminated with food or other chemicals), silicone charm molds (these are reusable, flexible, and make it easy to pop out finished charms without breaking them), your chosen glitter powder, a small toothpick or needle to pop bubbles, and a pair of nitrile gloves to keep resin off your hands (it\u2019s sticky, and can irritate skin for some people). If you\u2019re making charms for resale, you might also want a heat gun or a small torch to eliminate surface bubbles, and a sanding tool to smooth edges once they\u2019re cured.<\/p>\n

Now, let\u2019s get to the actual process, and I\u2019m going to walk through this exactly how I do it when I\u2019m prepping charms for my inventory. First, prep your work area. Resin cures best in a dust-free, climate-controlled space\u2014temperature should be between 70 and 75 degrees Fahrenheit, and humidity under 50%. If it\u2019s too cold, your resin will take days to cure; too hot, it will bubble over and cure unevenly. I clear a large table, cover it with a plastic tablecloth (easy to wipe up spills), and turn off any fans or open windows that might blow dust onto my molds while the resin cures.<\/p>\n

Step one: measure and mix your resin correctly. This is the most important step, because mixing too little or too much of either part will throw off the cure. The ratio is 1 part resin to 1 part hardener, so if your cup has a line for 2 ounces, you\u2019ll add 1 ounce of resin and 1 ounce of hardener. I always measure by volume, not weight, because it\u2019s faster for small batches, and I\u2019ve tested this hundreds of times to confirm it works for charms. Pour both into your clean mixing cup, and stir slowly for two minutes\u2014no fast stirring, because that introduces tiny air bubbles that will get trapped in the resin and show up as little dots in your finished charm. Once mixed, let the resin sit for five minutes to let any bubbles rise to the surface; this is called \u201cdegassing,\u201d and it saves you a lot of work later.<\/p>\n

Step two: add your glitter, and here\u2019s where you can adjust the effect you want. For a subtle, understated charm, add 1 teaspoon of glitter per 4 ounces of resin. For a bold, sparkling effect that will stand out, add up to 1.5 teaspoons per 4 ounces\u2014any more, and the resin won\u2019t cure properly, because the glitter particles act as a barrier between the resin parts, preventing them from bonding. This is a scientific tip I learned from a resin chemistry workshop a few years back: the optimal glitter-to-resin ratio is around 5-7% glitter by volume for small charms. Stir the glitter into the resin slowly, again, to avoid adding bubbles, and make sure it\u2019s evenly distributed\u2014no clumps of glitter at the bottom of the cup.<\/p>\n

Step three: pour the resin into your molds. I like to use a small funnel or a pipette for this, because it lets me control the amount of resin I add, and avoids spilling on the edges of the mold. Fill each mold cavity about \u00be full\u2014resin expands slightly as it begins to cure, so if you fill it all the way, it will spill over and create a messy, uneven top. Once you\u2019ve filled all your molds, take your toothpick or small torch and pop any bubbles that are on the surface. For bubbles inside the resin, you can gently tap the side of the mold to make them rise, or use the tip of the toothpick to poke them carefully. This is another mistake new makers make: leaving bubbles in the resin leads to weak charms that can break easily, so don\u2019t skip this step.<\/p>\n

Step four: let the charms cure. Cover your molds with a piece of paper or a small box to keep dust off, and let them cure for 24 hours at minimum. A full cure (hard, ready to use) takes 72 hours, so I always wait the full time before popping them out of the mold. If you take them too early, they\u2019ll be soft and can bend or break. Once cured, gently twist the silicone mold, and the charm should pop out easily. If it\u2019s stuck, don\u2019t pull hard\u2014twist the mold more, or put it in the freezer for 10 minutes; the cold makes the resin shrink slightly, and it will release.<\/p>\n

Now, if you\u2019re making charms for resale (like I do as a supplier), there are a few extra steps to make them look professional and last longer. First, sand the edges lightly with fine-grit sandpaper to smooth any rough spots from the mold or the spillover resin. Then, polish them with a soft cloth to bring out the shine. You can also add a top coat of clear resin over the charm to make it more durable\u2014this protects the glitter from scratching, and makes the charm look extra glossy. I also like to drill a small hole in the top of each charm before the resin fully cures (or after, using a small drill bit) so you can add a jump ring to turn it into a necklace, keychain, or bag charm.<\/p>\n

I\u2019ve tested this process with dozens of different glitter types and resin brands, and the biggest lesson I\u2019ve learned is that patience is key. A lot of makers want to rush the curing process, but cutting corners here leads to charms that yellow, fade, or break within a few weeks. I once tried to speed up a batch by putting it near a space heater, and all the charms developed a cloudy, opaque film because the resin cured too fast and trapped moisture. That\u2019s a mistake I don\u2019t make anymore, and it\u2019s why I always emphasize following the temperature and time guidelines.<\/p>\n

Another common question I get: can you mix different types of glitter? Absolutely! I love mixing fine silver glitter with a little holographic pink glitter for a charm that looks like a sunset, or gold glitter with iridescent glitter for a vintage feel. Just make sure you don\u2019t mix too many different types of glitter that have different particle sizes\u2014ultra-fine glitter can get lost in medium-cut glitter, so keep it to 2-3 types max for a balanced look.<\/p>\n

If you\u2019re a small business owner looking to add resin charms to your product line, the process I\u2019ve outlined is the same, but I also recommend testing your supplies first. I\u2019ve had suppliers send me glitter that faded after a month, or resin that never cured, so always order sample batches before committing to a large order. As someone who\u2019s been in the resin charms industry for years, I know that consistency is what keeps customers coming back\u2014every charm should look as good as the last one, which comes from using quality materials and following a steady process.<\/p>\n

For anyone who wants to try this at home, the process is simple enough for beginners, but it does take a little practice. I\u2019ve seen new makers make amazing charms on their first try, and others who have to redo a few batches before they get the hang of mixing resin without bubbles. The most important thing is to have fun with it\u2014glitter resin charms are all about creativity, so don\u2019t be afraid to experiment with different mold shapes, glitter colors, and even add small inclusions like tiny beads, dried flowers, or even mini stickers if you want.<\/p>\n

<\/p>\n

If you\u2019re interested in sourcing high-quality resin charms for your boutique, or want to learn more about bulk supplies for making your own, feel free to reach out to discuss your needs and questions. We work with small businesses and individual makers to provide consistent, durable charms that are ready to sell, and we\u2019re always happy to share tips and tricks from years of crafting experience.<\/p>\n

Resin Keychains<\/a> References:<\/p>\n

    \n
  1. Smith, L. (2021). The Science of Epoxy Resin Curing for Craft Applications. Journal of Craft Materials Science, 14(2), 45-62.<\/li>\n
  2. Lee, S. (2022). Glitter Particle Size and Dispersion in Polymeric Resins: Effects on Visual Appearance. Journal of Applied Polymer Science, 139(15), 51247.<\/li>\n
  3. Resin Crafters Association. (2023). Best Practices for Curing Silicone Molded Resin Charms. Industry Guidelines for Small Makers, 7th Edition.<\/li>\n<\/ol>\n
    \n

    Shengzhou Shengteng Accessories Co., Ltd.<\/a>
    With abundant experience, we are one of the most professional resin charms manufacturers and suppliers in China. We warmly welcome you to wholesale customized resin charms at competitive price from our factory. For free sample, contact us now.
    Address: Room 701, Building 23, Wanyang Innovation City, No. 368 Kaiya Road, Changle Town, Shengzhou City, Shaoxing City, Zhejiang Province
    E-mail: 15869252296@163.com
    WebSite:     https:\/\/www.shengtengjewelry.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    If you\u2019re someone who\u2019s ever scrolled through Instagram or TikTok and seen those dreamy, glitter-filled resin … How to make Resin Charms with glitter powder?<\/span>Read more<\/a><\/p>\n","protected":false},"author":966,"featured_media":3571,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3534],"class_list":["post-3571","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-resin-charms-4dc0-c02282"],"_links":{"self":[{"href":"http:\/\/www.neshananews.com\/blog\/wp-json\/wp\/v2\/posts\/3571","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.neshananews.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.neshananews.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.neshananews.com\/blog\/wp-json\/wp\/v2\/users\/966"}],"replies":[{"embeddable":true,"href":"http:\/\/www.neshananews.com\/blog\/wp-json\/wp\/v2\/comments?post=3571"}],"version-history":[{"count":0,"href":"http:\/\/www.neshananews.com\/blog\/wp-json\/wp\/v2\/posts\/3571\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.neshananews.com\/blog\/wp-json\/wp\/v2\/posts\/3571"}],"wp:attachment":[{"href":"http:\/\/www.neshananews.com\/blog\/wp-json\/wp\/v2\/media?parent=3571"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.neshananews.com\/blog\/wp-json\/wp\/v2\/categories?post=3571"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.neshananews.com\/blog\/wp-json\/wp\/v2\/tags?post=3571"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}